Coolant Heater for Electric Vehicle
|Terms of Trade:||FOB|
|Min. Order:||1 Piece/Pieces|
|Delivery Time:||30 Days|
|Packaging:||Carton or wooden case packing|
|Productivity:||20000 pieces for one day|
|Place of Origin:||China|
|Supply Ability:||7 million for one year|
Model No.: XHD-Y-220G030110/220V
Coolant Heater for Electric Vehicle
Jieda thick film heater heating elements from inside to outside are mainly composed of stainless steel tube substrate, internal insulating dielectric layer, resistance heating layer and external insulating dielectric layer. Water flows through the stainless steel tube. The thickness of internal insulating dielectric layer is about 100 microns. Because the heat conduction distance from resistance heating layer to stainless steel substrate is short, the water flows through the stainless steel tube. The thermal resistance is very small and the thermal response speed is fast. Among them, the advantages of application are thick film heating tube, barrel-like structure, natural waterway, 360 degree overall channel heating, the overall heating is more uniform, will not cause a large number of bubbles on the surface of the heater and reduce heating efficiency. Because the heat can be transmitted in time, the surface temperature of the whole heating tube is not high enough to cause an open flame. Good safety and long service life.
What are the advantages of using special thick film heater ?
(1) Time-saving: ordinary water dispenser need to start up for more than 3 minutes before they can produce hot water, and this stainless steel thick film heater can produce hot water as soon as it is turned on through direct heat transfer and pipeline design, which greatly saves time of heating.
(2) Energy saving: Because of the direct contact between the stainless steel thick film heater and water, the heat transfer efficiency is high and the time for heating the same amount of water is short.
(3) Reduce waste: Because of the use of stainless steel thick film design, there will be hot water as soon as the machine is turned on, so you can use as much hot water as you need, without any extra waste, and ordinary water kettle have to wait for all the water in the tank to be boiled before drinking.
(4) Controllable water temperature: Because of the design of water channel and the control of power, the outlet temperature can be adjusted as your requirement. Jieda Gidape stainless steel thick film heating tube has high electric strength, which can withstand 1250V high-strength insulation, and its thermal efficiency is higher than 98%.
The parameters of thick film heating elements
|Product Model XHD-Y-||220G030110/220V||Product application||Water dispenser/Water purifier/water kettle|
|Product Size||30MM*110MM||Fixing manner||Fix from sides/Fix from end|
|Tube Size||030mm*110mm||Water inlet&outlet connector size||Φ10mm|
|Standard Power/Voltage|| |
2200W(+ 5% ~ -10%)/220V
|Lead time||25 Days|
|Optional power||≤3300W||MOQ||1000 pieces|
|Electric strength||≥1250V/5mA/60s||Main Components||Heating tube/connector/thermostat, Temp.sensor/sprial column|
|Bearing Pressure||≤2Mpa||Product certification||CQC,ROHS,Wading health approval documents|
Because of the small size, our 2200w electric heating element with thermostant is our sale's star, which is widely used for water tap, water kettle,water purifier, sous vide,coffee machine and medical care machine.
Smart water heater Use precautions
1, The product temperature rising rate is greater than 80 ℃~150℃/S, so, please ensure that the tube is filled with water before use.
2, The pipe must be installed vertically when heating liquid, the direction of liquid flow is from the bottom up. To avoid local dry burning, please add water at first, and then connect to power.
3, Based on different powers, the user should ensure the minimum flow, while ensuring smooth water access to the pipe, so as to avoid vaporization and dry burning.
4, Pay attention to the surface heat dissipation; and due to a big power density, please also pay attention to the rate of heat exchange.
Brief introduction of our Company
Since its establishment in 2012, Jieda has been focusing on R&D and mass production of thick film heating pipes. The stainless steel thick film heating pipes produced by Jieda are widely acclaimed for its high thermal efficiency, stable performance and safety and durability. Jieda GIDAPE® ANDETONG® series stainless steel thick-film heating tube has four invention patents, dozens of utility model patents, we are also the first domestic company who produces stainless steel thick film products with CQC certification, wading health approval documents, ROHS certification.
XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD
Xinxiang Jieda Precision Electronics Co., Ltd( JIEDA) is a high-tech, knowledge –intensive enterprise, with two PHD degree holders. More than 70% employees graduated from colleges or higher level schools. We specialized in the development and manufacture of heating tube/ element using thick film technology, for a wide range of applications.
Our brand ANDETONG is the first registered Chinese brand of stainless steel thick film heating tube.
JIEDA company can supply products according to customers' drawings and offer our clients reasonable prices. Our company also can develop heating solutions and products together with customers.
More than 6 years experiences in Stainless Steel Tube Thick Film Heating tube/Element. Successfully Provided various solutions for top brands of home appliance: Haier, Midea, Kingclean(Lexy) , kohler,and so on.
Professional in screen printing on tube surface in 10,000+ Grade Air Purification Workshop and Sintering process.
Stable Mass Production (Quality and Lead Time) First manufacturer to mass produce Thick Film Heater Tube in China.
Annual production capacity 7.2 million pieces. No.1 sales volume in China.
Conform to ISO9001. Jieda Adetong series thick film heating tube/element has certificated by CQC, ROHS, FDA and MA. Reliable Most reliable among other Chinese suppliers according to industrial evaluation and customer feedback.
- Company Name: XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD
- Representative: Yand Ruida
- Product/Service: Electric Heating Tube , Thick Film Heating Element , Instant Heating Element , Tubular heater , Electric Heating Element , water heater element
- Capital (Million US $): 6000000 RMB
- Year Established: 2012
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 31% - 40%
- Total Annual Purchase Volume (Million US $): US$2.5 Million - US$5 Million
- No. of Production Lines: 11
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: 1789 Xinfei Road, Huojuyuan Industry Park, Xinxiang City, Henan Province, China.
- Contact Person: Ms. Cathy
- Tel: 86-0373-3801383
Premium Related Products